E-56
PISTON
TYPE PRESSURE REGULATING VALVES
APPLICATIONS:
Large commercial
and industrial water or air service installations.
SIZES:
2",
2-1/2", 3" - threaded connections
2", 2-1/2",
3" - 150# flanged connections
FEATURES:
Provides exceptionally high capacity for all services. Bronze
body with bronze piston and stainless steel seat ring. The E-56
has no diaphragm. It incorporates a spring-opposed, balanced piston
design. Maximum pressures: for all sizes with threaded connections,
400 psi; for all sizes with 150# flanges, 225 psi. Delivery pressure:
maximum 125 psi; minimum 25 psi. Maximum temperature 180°F
(82°C).
FOR
MORE INFORMATION, WRITE OR CALL
FOR BULLETIN
PRV-E.
EB-24U
MEDIUM
CAPACITY WATER PRESSURE REGULATING VALVE FOR DOMESTIC SERVICE
APPLICATIONS:
Domestic water
supply service.
SIZES: 1/2", 3/4", 1", 1-1/4", 1-1/2",
2", 2-1/2"
FEATURES:
Economical. Reduces inlet pressure of up to 300 psi down to 45
psi. Bronze body, monel strainer screen with separate clean-out
plug, screwed-in stainless steel body seat, nylon-reinforced Buna-N
diaphragm and replaceable composition seat disc. Maximum temperature
is 180°F (82°C). Standard factory set- ting is 45 psi,
with 10-40,20-70, 71-150 ranges available.
The
EB-24U has a threaded union inlet and an inbuilt back-pass check
valve which permits flow back to the inlet side if downstream
pressure exceeds the inlet pressure.
Type EB-24U is approved per A.S.S.E. and C.S.A.; listed by IAPMO
and the City of Los Angeles.
FOR MORE INFORMATION, WRITE OR CALL
FOR BULLETIN PRV-E.
EB-75
COMPACT
IRON BODY REGULATING VALVE FOR WATER SERVICE
APPLICATIONS:
Domestic installations
where small size and economy are important and where codes allow
the use of iron body units.
SIZES: 1/2", 3/4"
FEATURES:
Fully pressure-balanced piston. Automatically reduces and regulates
high inlet pressures (maximum 300 psi) down to 45 psi at standard
factory setting. Contains an inbuilt back-pass check which operates
independently of the regulator. This allows water to flow back
through the regulator in cases of thermal expansion caused by
hot water heating devices.
Iron body, threaded connections, iron spring chamber, brass piston
and seat ring, EP Rubber seat disc and diaphragm and an inbuilt
brass strainer screen.
FOR
MORE INFORMATION, WRITE OR CALL
FOR BULLETIN PRV-E.
EB-86
SERIES
DOMESTIC WATER REGULATING VALVES
APPLICATIONS:
Domestic water
supply lines.
SIZES: 1/2", 3/4", 1", 1-1/4", 1-1/2",
2"
FEATURES:
Bronze body and bottom plug, brass piston, stainless steel body
seat and seat spring, inbuilt monel strainer screen, EP rubber
seat disc, O-ring and reinforced diaphragm, and a standard threaded
union inlet (EB-86U).
Type
EB-86 Series is approved per A.S.S.E. and C.S.A.; listed by IAPMO
and the City of Los Angeles.
OPTIONS:
Also available with sweat copper union inlet (EB-86C), or a female
threaded inlet (EB-86; special order only).
FOR
MORE INFORMATION, WRITE OR CALL
FOR BULLETIN PRV-E.
