F,
FWC
MINIATURE
RELIEF VALVES
APPLICATIONS:
For commercial
and industrial applications including thermal expansion protection,
static pressure and over-pressure relief, very low capacity pump
relief and other uses of similar nature where tight shut-off is
required.
SIZES: See Table Below
FEATURES:
Small, low-cost relief valves suitable for static over-pressure
protection. Calibrated adjusting screw for occasional changes
in pressure setting without the use of a pressure gauge (FWC only).
Bronze bodies with male inlet and female outlet, silicone seat
and stainless steel spring. F-Series standard factory pressure
setting, 125 psi. FWC valve standard factory pressure setting,
125 psi.
OPTIONS:
F-Series psi setting from 25 to 200. FWC psi settings from 25
to 175.
FOR
MORE INFORMATION, WRITE OR CALL
FOR BULLETIN
RLF.
FV
SELF-CLOSING
T&P VALVE
APPLICATIONS:
Commercial
& domestic hot water heating devices.
SIZES: 3/4",1", 1-1/4", 1-1/2",2"
FEATURES:
Design
AGA certified per ANSI Z21.22 Relief Valves and Automatic Gas
Shutoff Devices. Bronze body, stainless steel spring, furnished
with test lever. Standard factory setting is 150 psi. Temperature
relief is 210°F (99°C). All FV Series valves through 1-1/4"
have coated thermal elements. Protects against corrosion and mineral
build-up.
The
coating also isolates the copper from galvanic action within the
heater. The 1-1/2" FVX-4 and the 2" FVMX-3 have stainless
steel elements. Male or female inlet connections; female outlet
connections.
OPTIONS:
Available with psi settings from 75 to 150. Available with stem
lengths of 3", 4", 5", or 8" depending on
type selected.
FOR MORE INFORMATION, WRITE OR CALL
FOR BULLETIN RLF.
